Skip to main content
Til toppen

Lanseutstyr

Visning
BEDA Thermo Lance tips for lances d 1/4" - 3/8"

TZ-02-03

inkl. mva.
Lance Holder w/lever 3/8" Ø lance 16-17,5mm

This Lance Holder has a very practical lever locking system acting on the sleeve and clamp. The pressure applied by the lever is adjustable by a ring. It has been designed for use in cases where large diameter (1" and over) lances are used, for which screw locking by-hand would be difficult. For higher safety, CONTESSI has recently introduced two new models of lance-holder with lever lock for 3/8" and 1/2" (BSP) lance diameters.

0645270191

inkl. mva.
OXYGEN FLOW / SAFETY CONTROL PANEL

0640105581

inkl. mva.
Optional Swivel Support for Take Up Reel Model 116N

Swivel bracket for hose-reels 116,131,216,231 series

0650260100

inkl. mva.
Pressure regulating box PPO/23

The pressure regulating boxes can be connected to the gas line at each point where Oxygen, fuel and inert gases. Pressure can be regulated for all purpose: brazing, oxy-cutting, heating or welding with shieldy gas. The protecting boxes are made entirely of stainless steel, with fixing holes and contain opening-closing valve, reducing valve with gauge, safety valve, for oxygen or fuel gases. odel Modello Media Fluido Operating pressure Pressione di esercizio Max flow Portata max Code Codice bar Nm3/h PPO/23 oxygen ossigeno 1,5÷15 40÷300 0640-105838 PPG/23 fuel gas gas combustibile 0,8÷6 25÷120 0640-105828

0640105838

inkl. mva.
Pressure regulator R1100 for oksygen-lancing inlet 220bar/ outlet 3-30bar G3/4"M" rack/bottles

Suitable for the use with Oxygen. On request available for different gas. Inlet connection for cylinder. Outlet threaded connection 3/8" or 1/2" BSP male, on request.

0624311121C

inkl. mva.
Protection Dome for Take Up Reel Model 116N

Made of galvanized steel, protects the hose from the risk of accidental damage, dust and exposure to heat and radiation.

0650260201

inkl. mva.
Protection disk for lance holder 3/8"

0204571347

inkl. mva.
SAFETY DEVICE ARIETE C-DEMAX 5 for high flow rate -

0626334511

inkl. mva.
SELF-EXTINGUISHING FLEXIBLE HOSE ASTM C-542

0632325690

inkl. mva.
Safety Device 5249 FA NV TV

Valve for medium flow rates; it is fitted with a non-return valve, sintered filter and thermal device to shut-off oxygen in case of backfire or slag return.

0646331601

inkl. mva.
Self-extinguishing Flexible Hose for Oxygen 1,5m

Manufactured out with a self-extinguishing hose (ASTM C-542). Metal braiding manufactured out of stainless steel wire, with blue ribbon. Suitable for pressurized Oxygen. According to EN ISO 3821 standard (replacing (UNI EN 559). Ageing and abrasion resistant. Recommended for heavy duty and for applications in harsh environments. Running nut connection (EN560) for easy installation. Max Operating Pressure 25 bar, on request 40 bar. Standard lengths 15,20,30,40m – custom lengths on request. Hosetails assembled with crimping ferrule or bolted clamp units (EN14420-3).

0632325190

inkl. mva.
Min side