Skip to main content
Til toppen

OK Tigrod 13.26 2.0x1000mm 5kg(221)

Produktnummer: 132620R15W
Salgsenhet: Kg ( Selges i Pakke à 5 Kg )
Forpakningsinfo: 1 Pakke = 5 Kg
inkl. mva.
Det tilkommer legeringstillegg på dette produktet.
221 Råmaterialtillegg lavlegert MAG/TIG 221

A copper coated, low-alloyed, nickel-copper (0,8% Ni, 0,45% Cu), rod for GTAW of weathering steels, such as COR-TEN, Patinax, Dillicor etc. According to NACE it
would be acceptable to use these welding consumables, since the nickel content is below the maximum acceptable level, 1 % for sour gas applications. One other
requirement from NACE is the maximum hardness of the deposited weld metal, which must not exceed 22 HRC. The weld metal composition and mechanical
properties also make this product suitable for welding high strength steels with a minimum yield strength less than 470 MPa.

Merke ESAB
Lengde 1000.0 mm
aws ER80S-G
Forpakning Pakke
Salgsenhet Kg
Legering 221
Opprinnelsesland Czech Republic
Tollgruppe / HS kode 72.28.6080
size.weight 0.0 g
size.length 0.0 cm
size.width 0.0 cm
size.height 0.0 cm
Min side