OK Tigrod 13.26 1.6x500mm 1kg(221)
Produktnummer: 132616R51C
Lagerbeholdning:
Salgsenhet: Kg
(
Selges i Pakke à 1
Kg
)
Forpakningsinfo:
1 Pakke = 1 Kg
inkl. mva.
Det tilkommer legeringstillegg på dette produktet.
| 221 | Råmaterialtillegg lavlegert MAG/TIG 221 |
|
A copper coated, low-alloyed, nickel-copper (0,8% Ni, 0,45% Cu), rod for GTAW of weathering steels, such as COR-TEN, Patinax, Dillicor etc. According to NACE it
would be acceptable to use these welding consumables, since the nickel content is below the maximum acceptable level, 1 % for sour gas applications. One other
requirement from NACE is the maximum hardness of the deposited weld metal, which must not exceed 22 HRC. The weld metal composition and mechanical
properties also make this product suitable for welding high strength steels with a minimum yield strength less than 470 MPa.
| Egenskaper | |
|---|---|
| Merke | ESAB |
| Lengde | 500.0 mm |
| aws | ER80S-G |
| Forpakning | Pakke |
| Salgsenhet | Kg |
| Legering | 221 |
| Volum | |
|---|---|
| size.weight | 0.0 g |
| size.length | 0.0 cm |
| size.width | 0.0 cm |
| size.height | 0.0 cm |